Furthermore, how do you remove a key chuck from a drill?
Hold the drill down firmly on a solid workbench, then insert the chuck key and hit it sharply with a mallet (turning it counterclockwise) to loosen the drill chuck from the threaded spindle. You may have to repeat this several times to loosen stubborn chucks. Unscrew the old drill chuck.
Likewise, how do you remove a chuck from a Skil drill?
- Unplug the drill's electrical cord from the power outlet.
- Rotate the chuck collar to open the chuck's jaws to their widest point, and set aside any drill bit that was in the chuck.
- Insert an Allen wrench inside the opened chuck and into the screw in the back of the chuck.
- Place the drill flat on a table.
Also asked, how do you remove the chuck from a Hitachi drill?
Lay the drill on its side with the long portion of the Allen wrench pointing to the left. Strike the Allen wrench hard with a mallet to loosen the chuck from the spindle. Open the chuck enough to remove the Allen wrench, and turn the chuck counterclockwise to remove the chuck from the drill.
Why is my drill chuck stuck?
If the chuck is stuck open, check that the screw inside the drill chuck is fasten tight. If it is loose, it can prevent movement of the teeth. To solve this problem, insert the proper screwdriver in the drill chuck and tighten. Remember, this screw is reversed thread so turn it counter clockwise to tighten.
