How do you measure how much material you need for a valance?

Divide the cut fabric width by the width of the chosen fabric for the number of widths required. Multiply that number by the cut fabric length. Divide the result by 36 for the number of yards of fabric required for a self-lined gathered valance.

Thereof, how do you measure fabric for a valance?

To make a plain valance, first measure the width of your window. Multiply this width by 1-1/2. The length of the valance should be 1/4 the window height plus one inch. Using these measurements, cut a rectangle from your fabric and lining.

Likewise, how many inches should a valance be? Another rule of thumb used by decorators is that the window valance depth should be 1/4 of the overall window height, plus 1 inch. A 60-inch tall window, then, would call for a 16-inch deep valance, while a 48-inch window calls for a valance about 13 inches deep.

Similarly one may ask, how much material is needed for a valance?

The obvious answer is that it depends, but you should expect to need somewhere between 1-1/2 to 5 yards of face fabric for a standard 36- to 40-inch window.

How wide should a valance be for a 36 inch window?

To determine the width of a valance for a 36-inch window, the Window Treatment Expert website suggests adding 2 to 4 inches on each side, adding less for narrower windows and more for wider windows. For a 36-inch window, this measurement would provide you with a valance that has a width of 40 to 44 inches.

How long is a standard Valance?

14 inches

How much wider Should a Valance be than the window?

Most valances should only be 1-1/2 to 5 inches wider than the window if the valance hangs by itself or over a Roman shade. It should be 10 to 30 inches wider than the window if it's hung over a pair of custom drapes. If the valance is gathered, its total, flat width should be 2 to 3.5 times the width of the window.

How much fabric do I need for a swag valance?

Jabots are folded pieces of fabric that fall from the top of the drapery heading or valance to crate a zig-zag effect. Jabot must be lined with the cover fabric or one that contrasts. Yardage: Swags – Based on an average of 44″ per swag, you will need 2 yards of fabric per swag.

How do you make a simple valance?

Here's How:

Measure the width of the window.
Determine the desired length of the valance, starting at the curtain rod.
Lay the fabric on a flat surface, with the front of the material facing down.
Add 2 inches to the width of each valence panel for the hems.
Measure the desired depth of the valence onto the fabric.

How do you sew a lining in a valance?

Fold 1/2 inch to the back of your valance on both sides and pin as you go and then iron the seam. This will be the short end of the fabric. Use a straight stitch to sew the seams. Repeat with the lining fabric.

Where do you hang a valance?

You'll have more freedom to hang the valance as you desire in a room with higher ceilings, but it's best to still hang it high. With 9- or 10-foot ceilings, the valance should hang at least halfway between the top of the window and ceiling.

How do you calculate yardage for a valance?

Multiply the finished width of the valance by 2.5 for the cut fabric width. Multiply the required finished length by 2 for the cut fabric length per width. Divide the cut fabric width by the width of the chosen fabric for the number of widths required. Multiply that number by the cut fabric length.

How do you hang valances over blinds?

Mark the area where the valance will be attached to the wall above the vertical blinds.
Measure from the top of the window or door frame to the height needed for the L brackets.
Install the L brackets according to your measurements.

How much fabric do I need for a box pleat valance?

The finished width of the valance is three times the width of the window, so multiply the window width times three. For instance, a 35-inch width requires 105 inches of fabric. Note that most fabric is 45 or 54 inches wide. It is necessary to cut multiple pieces.

How many curtain panels do I need?

Example: If your window measures 36" wide (window width x 2 = 72"), you need curtains that will give a minimum width of 72" or 2 panels for that window. In this case 2 panels will give about 100" to 120" of width which will look nice and full. Always round up to the next full number.

How much fabric do I need for inverted pleat curtains?

Mine's going to be 3 ½”. As a starting place for the amount of fabric needed for the pleats, you can multiply the distance you want the curtain panel to cover by about 2 or 3, depending on how full you want the curtains. Or start with the maximum width of fabric you want to use, which is what I did.

How do you make a gathered balloon valance?

Here's how to create a balloon valance that will enhance your window treatment.

Step 1–Measure the Fabric.
Step 2–Ruffle and Hem.
Step 3–Sew the Edges.
Step 4–Top Ruffle.
Step 5–Rod Pocket.
Step 6–Install Brackets.
Step 7–Thread the Rod.
Step 8–Balloon Creation.

Can you use a valance with blinds?

They're often made of hard wood or PVC plastic slats. Most Venetian blinds are inside-mounted, so you'll be able to use virtually any type of valance as an outside-mount. Continuing on with the black and white color combination for valances, it's best to just stick with white blinds.

How wide are valances?

Workroom Guidelines Opt for valances of 24- to 36-inches deep for opulent styles, such as board-mounted swags. The overall width of a valance should be between 3 to 4 inches wider than the window or treatment it covers. If used alone, frame the window opening within a few inches.

How wide is a valance?

If you're shopping for ready-made valances, the most common standard size you'll likely come across is a 50-inch wide valance. If you're hiring a custom workroom, you can specify any size. We offer valances between 18 and 189 inches wide on our site.

How do you measure a swag valance?

Starting from the top of the pole on the left-hand side, take your flexible measuring tape and re-create the arc of the swag over to the top right-hand side of the pole. This is your swag measurement. You need to measure the lowest part of the draped swag in order to get the appropriate amount of fabric.

Can I hang curtains without a rod?

Coat Hooks Besides holding raincoats and bags, they can also be used to hang curtains. To install them, intersperse the coat hooks at an even distance across the window. Coat hooks are easier to hang than traditional curtain rod hardware and don't require drilling.